|
PRODUCTS - Individual Components
|
|
TREKKER Tank (tank and accessories only) |
 |
|
| Golden
Valve GV10 NEW! |
 |
WATCH
A FLOW COMPARISON TEST BETWEEN THE GV10 AND OTHER COMMONLY USED
SVO VALVES: Part
1 and 2
The key to a well designed SVO system is to insure the unrestricted
flow of the vegetable oil from the tank to your engine. We are
pleased to introduce the new Golden Fuel Systems GV10 Valve! Like
our 3B hose and Trekker tanks, the GV10 is designed specifically
for SVO and biodiesel. These valves are compact, yet have unsurpassed
flow rates. Restriction is not a problem with these valves.
IMPORTANT: Click
here for DETAILS and INSTRUCTIONS |
| Additional
Photos: Golden Valve GV10 |
|
| Suction Screen |
|
Great Suction Strainer for the end of any collection/transfer
or filtration pump set-up. This PVC/Stainless Steel Suction Strainer
has ¾” MPT molded thread to allow for any size hose
Barb x ¾” MPT Fitting. 20 mesh screen if fine enough
to filter out corn meal, French Fries and small mammals, but large
enough not to restrict flow to the pump. Dimensions: 2 –
¼” Wide x 1 -5/8” Deep
This Suction Screen is not a Final Pre-filter. It is
only meant to protect your pump internals from Debris. For a full
Filtration System, please check out the One-Shot
Filtration Unit.
|
| Additional
Photos: Suction Screen |
|
| Raptor
Vegetable Oil Pump - 100GPH |
|
The raptor is adjustable from 6 to 60 PSI HIGH END Gearotor Pump
Featuring:
• A built in ADJUSTABLE REGULATOR, No Return Line Needed
• 15/16,000 hour Electric Motor
• Flow Rates of 100 GPH
• VacU Seal Technology (Shaft Seals Under Vacuum Instead
Of Pressure for Long Life)
Please check to ensure that the appropriate
pump pressure is selected so that it is compatible with the vehicle.
GFS is not liable for any damage caused by improperly selected
pressures.
|
| FASS
HPFP Vegetable Oil Pump - Heavy Duty Model 1004 |
|
Upgrade your stock or SVO Accessory Pump to a FASS High Performance
Fuel Pump for the most reliable SVO Pump on the Market. This pump
is specifically designed for SVO applications. It also comes with
a Two Year Factory Warranty!
Please check to ensure that the appropriate
pump pressure is selected so that it is compatible with the vehicle.
GFS is not liable for any damage caused by improperly selected
pressures.
|
| 3/8
inch 3B Hose |
 |
An absolute must for any SVO system, this hose was designed exclusively
by Golden Fuel Systems for SVO use. The hose is comprised of two
1/2" coolant hoses extruded with one 3/8” fuel line
and 4 wires to control all necessary electrical components of
your SVO system and all of this is encased in ¼”
Rubberized PVC sheath for insulation and protection. The convenience
of combining all of these into one hose so you only have to rout
one line from your SVO tank to your engine makes installation
even easier. The two ½” hot water lines act as supply
from the engine to the SVO tank and then from the SVO tank to
the engine. This keeps the SVO hot at all operating times. Utilizing
the heat that the engine produces is the most efficient and safe
way to heat larger volumes of SVO. The rubberized PVC sheath and
hoses are extremely durable and as the hoses are in a Hose-on-Hose
configuration, there is no chance of contamination between fuel
and water. This hose can be run under the car without fear of
rupture or failure.
3B hose is sold by the foot in our shopping cart. Please indicate
how many feet you need by changing the quantity accordingly. Example
Qty 20 = 20 feet of 3B hose.
|
| Additional
Photos: 3B Hose |
|
| Filter
Insulator |
 |
This
flexible, foam insulator is designed to help keep your vegetable
oil fuel filter warmer in cold conditions. Our filter insulators
are designed to fit the Racor 1000 and 900 fuel filters. If used
in conjunction with our Heater Wraps, the adhesive backing is designed
to withstand the high temperatures. This product is designed
exclusively for our application.
|
| Additional
Photos: Filter Insulator |
|
| 87
Watt Heater Wrap |
 |
Designed
to fit the 900 and 1000 Racor fuel filters, this flexible adhesive
backed, silicone wrap easily reaches 220 degrees in a couple of
minutes. This wrap is great for larger filters that need an extra
boost of instant heat. With a PSA adhesive backing and 24"
Silicone leads, this heater can be easily installed on your SVO
filter. The adhesive backing is designed to withstand high temperatures.
Wire to a 12V switch or key-on source to control heater. This
product is designed exclusively for our application.
|
| Additional
Photos: 87 Watt Heater Wrap |
|
| 100
Watt Heater Wrap |
 |
Designed
to fit the 6120 and 690 Racor fuel filters, this flexible laced
together, silicone wrap easily reaches 220 degrees in a couple of
minutes. This wrap is great for larger filters that need an extra
boost of instant heat. Wire to a 12V switch or key-on source to
control heater. This product is designed exclusively for
our application.
|
| |
| Arctic
Fox Brand Hot Fox – Stainless Steel, Coolant-Heated Fuel Pick-up
|
|
This coolant-heated fuel pick-up accelerates switch-over times
in the winter by essentially “heating on demand.” This steel tube
heats the oil at the source of the fuel pick-up, allowing for
the most efficient heating of the oil.
The Hot Fox is constructed of stainless steel, so there is no
chance of contamination between fuel and coolant. It can be rotated
in the tank for easy hose alignment. It fits in a 1-5/8” hole
and has a low-profile, less than 1-1/4”above tank. Three ˝” FPT
Ports allow for multiple set-ups. Due to the variety of configurations
possible, these barb fittings are not supplied with the unit.
Multiple depth sizes are available to fit tanks between 10” and
29” deep. Five-year (5-year) or 600,000 mile Warranty included!
|
| Additional
Photos: Arctic Fox Heated Fuel Pick-up |
 |
| 900FH
& 1000FH Internal Heater Upgrade |
|
This
quick upgrade will assist SVO users during the winter by adding
another 300 Watts of immediate heat to cold Veggie in the Filter.
This reduces switch over time and issues of cold SVO causing restriction.
This heater upgrade is a must have for the Northern Climates. It
is designed to be used in conjunction with the GFS External Heater
Wrap and is a genuine Racor product. It has a safety thermostat
that turns the unit on at 50 degrees and raises the fluid temperature
to 80 degrees. This thermostat allows the powerful 300 Watt heater
to operate at safe temperatures inside the Racor filter housing.
The heater installs through the top of the filter and takes 10-15
minutes to install. Load: 25 amps
|
| 6120
Internal Heater Upgrade |
|
This
quick upgrade will assist SVO users during the winter by adding
another 200 Watts of immediate heat to cold Veggie in the Filter.
This reduces switch over time and issues of cold SVO causing restriction.
This heater upgrade is a must have for the Northern Climates. It
is designed to be used in conjunction with the GFS External Heater
Wrap and is a genuine Racor product. It has a safety thermostat
that turns the unit on at 50 degrees and raises the fluid temperature
to 80 degrees. This thermostat allows the powerful 200 Watt heater
to operate at safe temperatures inside the Racor filter housing.
This heater will come attached to a bowl to replace your existing
bowl. This takes less than 5 minutes to spin-on. Load: 16.6 amps
|
| 690
Internal Heater Upgrade |
 |
This
quick upgrade will assist SVO users during the winter by adding
another 200 Watts of immediate heat to cold Veggie in the Filter.
This reduces switch over time and issues of cold SVO causing restriction.
This heater upgrade is a must have for the Northern Climates. It
is designed to be used in conjunction with the GFS External Heater
Wrap and is a genuine Racor product. It has a safety thermostat
that turns the unit on at 50 degrees and raises the fluid temperature
to 80 degrees. This thermostat allows the powerful 200 Watt heater
to operate at safe temperatures inside the Racor filter housing.
This heater will come attached to a bowl to replace your existing
bowl. This takes less than 5 minutes to spin-on. Load: 16.6 amps.
|
| 660
Internal Heater Upgrade |
|
This
quick upgrade will assist SVO users during the winter by adding
another 200 Watts of immediate heat to cold Veggie in the Filter.
This reduces switch over time and issues of cold SVO causing restriction.
This heater upgrade is a must have for the Northern Climates. It
has a safety thermostat that turns the unit on at 50 degrees and
raises the fluid temperature to 80 degrees. This thermostat allows
the powerful 200 Watt heater to operate at safe temperatures inside
the Racor filter housing. This heater will come attached to a bowl
to replace your existing bowl. This takes less than 5 minutes to
spin-on. Load: 16.6 amps
|
| Racor
Compact Coolant Heater |
|
This easy to install and extremely durable unit allows for comprehensive
heat coverage. This unit is coolant heated for an extra blast
of heat wherever the system needs it. Included is a steel bracket
that makes mounting on the framerail or in the engine a breeze.
The Coolant Ports are 5/8” ID and the Fuel Hose come with
pre-installed 7/8” – 14 o-ring fittings (SAE) and
reducer bushings for 3/8” MPT. Includes Plumbing instructions.
Basic Model:
Coolant heat exchanger type unit.
Use with engines up to 300 horsepower.
Aluminum die—cast body and plated steel coolant heat exchanger.
Accepts 5/8” I.D. coolant hoses.
Mounting bracket and hardware included.
List Price $307.50 Our Price: $199.94
That a 35% Savings!
|
| Additional
Photos: Coolant Heater |
|
| Bucket
Heater |
 |
This item can be found at your
local farm supply store.
This heater will heat continuously past 150° F and towards boiling,
depending on the volume of fluid and if the container is insulated
and protected from the elements. Each unit comes with a stainless
steel Guard and has an automatic shut-off. This unit can be found
at Farm Stores around the country. It is very useful for heating
the oil for pre-filtering use. Check it out in action on our Liquid
Gold DVD!
|
| |
|