This quick upgrade will assist SVO users during the winter by adding another 300 Watts of immediate heat to cold Veggie in the Filter. This reduces switch over time and issues of cold SVO causing restriction.

This heater upgrade is a must have for the Northern Climates. It is designed to be used in conjunction with the GFS External Heater Wrap and is a genuine Racor product. It has a safety thermostat that turns the unit on at 50 degrees and raises the fluid temperature to 80 degrees. This thermostat allows the powerful 300 Watt heater to operate at safe temperatures inside the Racor filter housing. The heater installs through the top of the filter and takes 10-15 minutes to install. Load: 25 amps

Options:

900/1000FH Int. Heater Upgrade: $150.00 + $7.50 S/H

This quick upgrade will assist SVO users during the winter by adding another 200 Watts of immediate heat to cold Veggie in the Filter. This reduces switch over time and issues of cold SVO causing restriction.

This heater upgrade is a must have for the Northern Climates. It is designed to be used in conjunction with the GFS External Heater Wrap and is a genuine Racor product. It has a safety thermostat that turns the unit on at 50 degrees and raises the fluid temperature to 80 degrees. This thermostat allows the powerful 200 Watt heater to operate at safe temperatures inside the Racor filter housing. This heater will come attached to a bowl to replace your existing bowl. This takes less than 5 minutes to spin-on. Load: 16.6 amps

Options:

6120 Int. Heater Upgrade: $147.34 + $7.50 S/H

This quick upgrade will assist SVO users during the winter by adding another 200 Watts of immediate heat to cold Veggie in the Filter. This reduces switch over time and issues of cold SVO causing restriction.

This heater upgrade is a must have for the Northern Climates. It is designed to be used in conjunction with the GFS External Heater Wrap and is a genuine Racor product. It has a safety thermostat that turns the unit on at 50 degrees and raises the fluid temperature to 80 degrees. This thermostat allows the powerful 200 Watt heater to operate at safe temperatures inside the Racor filter housing. This heater will come attached to a bowl to replace your existing bowl. This takes less than 5 minutes to spin-on. Load: 16.6 amps.

Options:

690 Int. Heater Upgrade: $157.34 + $7.50 S/H

This quick upgrade will assist SVO users during the winter by adding another 200 Watts of immediate heat to cold Veggie in the Filter. This reduces switch over time and issues of cold SVO causing restriction.

This heater upgrade is a must have for the Northern Climates. It has a safety thermostat that turns the unit on at 50 degrees and raises the fluid temperature to 80 degrees. This thermostat allows the powerful 200 Watt heater to operate at safe temperatures inside the Racor filter housing. This heater will come attached to a bowl to replace your existing bowl. This takes less than 5 minutes to spin-on. Load: 16.6 amps

Options:

660 Int. Heater Upgrade: $157.34+ $7.50 S/H

This coolant-heated fuel pick-up accelerates switch-over times in the winter by essentially “heating on demand.” This steel tube is heating the oil as your vehicle is requiring it for the engine.

The Hot Fox is constructed of stainless steel, so no chance of contamination between fuel and coolant. It can rotated in the tank for easy hose alignment. It fits in a 1-5/8” hole and has a low-profile, less than 1-1/4”above tank. Three ½” FPT Ports allow for multiple set-ups. Due to the variety of configurations possible, these barb fittings are not supplied with the unit. Multiple depth sizes available to fit tanks between 10-29” deep.

Options:

Hot Fox 10"-12": $209 + $12.50 S/H Hot Fox 12"-14": $209 + $12.50 S/H Hot Fox 13"-15": $209 + $12.50 S/H Hot Fox 14"-16": $209 + $12.50 S/H Hot Fox 17"-19": $209 + $12.50 S/H Hot Fox 20"-22": $209 + $12.50 S/H Hot Fox 22"-24": $209 + $12.50 S/H Hot Fox 24"-26": $209 + $12.50 S/H Hot Fox 26"-28": $209 + $12.50 S/H Hot Fox 27"-29": $209 + $12.50 S/H

This easy to install and extremely durable unit allows for comprehensive heat coverage. This unit is coolant heated for an extra blast of heat wherever the system needs it. Included is a steel bracket that makes mounting on the framerail or in the engine a breeze. The Coolant Ports are 5/8” ID and the Fuel Hose come with pre-installed 7/8” – 14 o-ring fittings (SAE) and reducer bushings for 3/8” MPT. Includes Plumbing instructions.

Basic Model:

Coolant heat exchanger type unit.

Use with engines up to 300 horsepower.

Aluminum die—cast body and plated steel coolant heat exchanger.

Accepts 5/8” I.D. coolant hoses.

Mounting bracket and hardware included.

List Price $307.50 Our Price: $199.94 That a 35% Savings!

Options:

Extreme Weather Heat Exchanger: $199.94 + $10.00 S/H