|
PRODUCTS - Individual Components
|
|
TREKKER Tank (tank and accessories only) |
 |
|
| Suction Screen |
|
Great Suction Strainer for the end of any collection/transfer
or filtration pump set-up. This PVC/Stainless Steel Suction Strainer
has ¾” MPT molded thread to allow for any size hose
Barb x ¾” MPT Fitting. 20 mesh screen if fine enough
to filter out corn meal, French Fries and small mammals, but large
enough not to restrict flow to the pump. Dimensions: 2 –
¼” Wide x 1 -5/8” Deep
This Suction Screen is not a Final Pre-filter. It is
only meant to protect your pump internals from Debris. For a full
Filtration System, please check out the One-Shot
Filtration Unit.
|
| Additional
Photos: Suction Screen |
|
| FSV1 3 Port Switching Valve |
|
12
Volt, 3-Port Fuel Selector Valve. This FSV1 is a perfect supply
valve for sedans. Do not allow to run over more than 8 psi. This
valve is not suitable for pressurized systems, i.e. in-tank pump
set-ups.
IMPORTANT: Click
here for DETAILS and INSTRUCTIONS |
| Pollak 6 Port Switching Valve Kit |
|
This valve is actuated via a stepper motor. The kit includes a wiring harness and the special on/on switch required for operation.
|
| FASS
HPFP Vegetable Oil Pump - Heavy Duty Model 1004 |
|
Upgrade your stock or SVO Accessory Pump to a FASS High Performance
Fuel Pump for the most reliable SVO Pump on the Market. This pump
is specifically designed for SVO applications. It also comes with
a Two Year Factory Warranty!
Please check to ensure that the appropriate
pump pressure is selected so that it is compatible with the vehicle.
GFS is not liable for any damage caused by improperly selected
pressures.
|
| FASS
HPFP Vegetable Oil Pump Adjustable Model 1002-ADJ |
|
Upgrade your stock or SVO Accessory Pump to a FASS High Performance
Fuel Pump for the most reliable SVO Pump on the Market. This pump
is specifically designed for SVO applications and is perfect for
vehicles needing 10-20 psi and 95 gph flow rate. Included is a
Six-Year Factory Warranty!
Please check to ensure that the appropriate
pump pressure is selected so that it is compatible with the vehicle.
GFS is not liable for any damage caused by improperly selected
pressures.
|
| FASS
HPFP Vegetable Oil Pump Adjustable Model 1004-ADJ |
|
Upgrade your stock or SVO Accessory Pump to a FASS High Performance
Fuel Pump for the most reliable SVO Pump on the Market. This pump
is specifically designed for SVO applications and is perfect for
vehicles needing 20-135 psi and 120 gph flow rate. Included is
a Six-Year Factory Warranty!
Please check to ensure that the appropriate
pump pressure is selected so that it is compatible with the vehicle.
GFS is not liable for any damage caused by improperly selected
pressures.
|
| 3/8
inch 3B Hose |
 |
An absolute must for any SVO system, this hose was designed exclusively
by Golden Fuel Systems for SVO use. The hose is comprised of two
1/2" coolant hoses extruded with one 3/8” fuel line
and encased in ¼” Rubberized PVC sheath for insulation
and protection. The two ½” hot water lines act as
supply from the engine to the SVO tank and then from the SVO tank
to the engine. This keeps the SVO hot at all operating times.
Utilizing the heat that the engine produces is the most efficient
and safe way to heat larger volumes of SVO. The rubberized PVC
sheath and hoses are extremely durable and as the hoses are in
a Hose-on-Hose configuration, there is no chance of contamination
between fuel and water. This hose can be run under the car without
fear of rupture or failure. This is an exclusive product of GFS.
Bend radius is 10” and Nominal Outside Diameter is 1.58”.
3B hose is sold by the foot in our shopping cart. Please indicate
how many feet you need by changing the quantity accordingly. Example
Qty 20 = 20 feet of 3B hose.
|
| Additional
Photos: 3B Hose |
|
| 100
Watt Heater Wrap |
 |
This
flexible, silicone wrap easily reaches 220 degrees in a couple of
minutes. This wrap is great for larger filters that need an extra
boost of instant heat. Wire to a 12V switch or key-on source to
control heater. This product is designed exclusively for
our application.
|
| |
| Arctic
Fox Brand Hot Fox – Stainless Steel, Coolant-Heated Fuel Pick-up
|
|
This coolant-heated fuel pick-up accelerates switch-over times
in the winter by essentially heating on demand. This steel tube
heats the oil at the source of the fuel pick-up, allowing for
the most efficient heating of the oil.
The Hot Fox is constructed of stainless steel, so there is no
chance of contamination between fuel and coolant. It can be rotated
in the tank for easy hose alignment. It fits in a 1-5/8 hole
and has a low-profile, less than 1-1/4above tank. Three ½ FPT
Ports allow for multiple set-ups. Due to the variety of configurations
possible, these barb fittings are not supplied with the unit.
Multiple depth sizes are available to fit tanks between 10 and
29 deep. Five-year (5-year) or 600,000 mile Warranty included!
|
| Additional
Photos: Arctic Fox Heated Fuel Pick-up |
 |
| Bucket
Heater |
 |
This item can be found at your
local farm supply store.
This heater will heat continuously past 150° F and towards boiling,
depending on the volume of fluid and if the container is insulated
and protected from the elements. Each unit comes with a stainless
steel Guard and has an automatic shut-off. This unit can be found
at Farm Stores around the country. It is very useful for heating
the oil for pre-filtering use. Check it out in action on our Liquid
Gold DVD!
|
| |
|